2 - 1''x 4''x 8' pine boards
4 - 21-1/4'' table legs (Found at Lowe's - they have several heights available)
MDF, Plywood Board (I used 5/8'' plywood that I already had) This can be cut to size at your local Home Depot or Lowe's.
Size 10 - 2-1/''2 & 1-1/2'' Wood Screws
1 pkg. of 1/2'' Wood Buttons (found in decorative wood accents aisle at Home Depot)
Drill with 9/64'' and 1/2'' bits
Miter Saw or Miter Saw Box
Nail gun or hammer and finishing nails
Quick Square or right angle tool
Upholstery Foam (I bought mine at Hobby Lobby with 40% off coupon)
3/4 Yard Fabric of Choice
Optional: Wood Trim (at least 16')
Step 1: Each 1" X 4" should be cut down into three separate boards. One 50" L board, 17" L board, and one 15-1/2" L board. This will provide you with the four sides as well as some extra support boards for under the bench cushion.
Linking up to: